Search

Drilling Winch

Introduce Using a drill as a power source is a convenient and versatile way of powering the winch without always relying on mains power. Lightweight and portable, it’s also the perfect back seat solution for almost every job. Winch driver Requirement 1. The winch driver should be professionally......

Send InquiryChat Now

Introduce of Drilling Winch

Using a drill as a power source is a convenient and versatile way of powering the winch without always relying on mains power. Lightweight and portable, it’s also the perfect back seat solution for almost every job.

drilling winch.jpg

Winch driver Requirement

1. The winch driver should be professionally trained to hold a certificate. When working, it is necessary to concentrate. If there is any obstruction in the line of sight, it must be promptly removed. The operator must not operate when the signal is unclear.

2. Before the work, you should idle, confirm that the electrical, braking and environmental conditions are in order to operate. The operator should understand the main content and workload of the shift work.

3. The driver must not leave the post if the object is not completely on the ground. When resting or suspending work, objects or cages must be lowered to the ground. After work, you should cut off the power and close the electric gate.

drilling winch.jpg

4. Drivers should always pay attention to operating conditions and wire rope wear. When the load changes for the first time, it should first stop 0.5m off the ground, and then continue to rise when there is no problem.

5. When using a single drum winch, the brake must be used to control the descent speed. Do not use too fast and slam the brakes. Slow down.

6. It is forbidden to use the toggle switch to prevent collision mistakes.

drilling winch(1).jpg

7. The wire rope should be regularly applied with butter and placed in a special channel to prevent roll rolling and damage the strength of the wire rope.

8. When the rated pulling force of the hoist is greater than 125KN, the rope looms should be installed. The ropes on the drum should be kept at least 3 to 5 turns. The end of the rope should be fixed and reliable.

9. The distance from the outside of the reel to the outermost wire rope should not be less than 1.5 times the wire rope diameter

10. During the operation, no one may cross over the winch wire rope being worked.

drilling winch(2).jpg

Package of Drilling Winch

Hot Tags: drilling winch, China, suppliers, manufacturers, factory, cheap, customized, price, made in China
Related Products
Copyright © Xinxiang New Leader Machinery Manufacturing Co.,Ltd All Rights Reserved.